- Main Results -

In this brief overview will be offered as an example only a few of the many results available to the software.

filling	filling balance	shear rate	shrinkage
cycle time	gates dimensions	gates positioning	clamp force
sink index	air traps	weld lines	residual stress
deflection	fiber orientation	cooling	packing

 

Fill Time Result

The Fill time result shows the position of the flow front at regular intervals as the cavity fills. Each color contour represents the parts of the mold which were being filled at the same time. At the start of injection, the result is dark blue, and the last places to fill are red. If the part is a short shot, the section which did not fill has no color.

NEXT RESULT