- Main Results -

 

filling	filling balance	shear rate	shrinkage
cycle time	gates dimensions	gates positioning	clamp force
sink index	air traps	weld lines	residual stress
deflection	fiber orientation	cooling	packing

 

Weld Lines Result

The Weld lines result is generated at the end of a filling analysis. This analysis shows where weld lines are likely to occur on your model along with the angle at which the flow fronts converge to form the weld line. Weld lines occur where two or more flow fronts converge. The presence of weld lines may indicate a structural weakness and/or a surface blemish.

PREVIOUS RESULT

NEXT RESULT